InSinkErator® commercial hot water systems reduce serving time, require no expensive pipe runs and are easy to install. That's why we're number one with foodservice operators, equipment dealers and consultants.Our commercial hot water dispensers provide 190°F near boiling water instantly. Prepare up to 100 cups of hot water per hour for tea, coffee, soups, sauces and more. That really speeds up serving time in restaurants, school cafeterias, coffee shops, convenience stores and kiosks.Designed for large volume usage of steaming hot water. Up to 100 cups of 190°F hot water per hour are provided by the system's 1/2 gallon tank. Saves time, work and water -- you only heat the water you use.
|
|
|
|
|
|
|
|
The Model H-778™ offers the following features:
- System provides up to 100 cups of 190°F water per hour
- Chrome-plated faucet completely insulated from 190°F water.
- Die-molded, high efficiency, expanded polystyrene thermal barrier surrounds tank for low heat loss.
- Adjustable thermostat, convenient drain, thermally fused to prevent tank damage from dry start-up or loss of water.
- Tank is always open to atmospheric pressure and requires no relief valves.
- Spout is elevated to fill large containers.
- Stainless steel case.
- Mounts in standard sink opening or 1-1/4" drilled hole.
- Minimum water required
The Model H-778™ has the following Specifications.
Includes InSinkErator® Model H-778 2/3-gallon capacity insulated tank with drain plug, 1300 watt heater, instant self-closing valve, adjustable thermostat, 1-year full warranty on parts and labor.Electrical 1300 watts, 11.3 amps, 120 voltsA.C. U.L. listed: 3-wire cord and 3-prong plug provided.Snap-action, adjustable thermostat from 140°F to 200°F (factory pre-set at 190°F).Insulation meets U.L. 94HF-1 flammability specificationInstant, self-closing valve.  Specifications
Installation Care and Use Manual
InSinkErator may make improvements and/or changes in the specifications at any time, in its sole discretion, without notice or obligation and further reserves the right to change or discontinue models.
To complete your In-Sink-Erator commercial disposer package, select from an extensive offering of controls and accessories. Choose a switch or control center and a mounting adaptor or bowl sink assembly. And for a reduction in water usage, select an Aqua-Saver System, available as an accessory or control center.
Our products appear on The KCL CADalog CD-ROM based CAD Foodservice Symbol Library. More information is available from Kochman Consultants, Ltd. at www.kclcad.com.
Model H-778™ has a one year warranty from date of installation.
The warranty includes parts and labor, provided the service is performed by an InSinkErator® Factory Authorized Service Center.
This warranty does not apply if a disposer failure is due to: faulty or improper electrical installation, faulty or improper plumbing installation, product abuse or misuse, accidental damage, grinding elements jammed by foreign objects, clogged drain lines, improperly sized unit (as specified by InSinkErator®).
ISO 9001 Certification
InSinkErator ® has been an ISO 9001 Certified manufacturing facility since 1996.
ISO stands for International Organization for Standardization, a group which provides for the development of international standards. The ISO standard promotes documentation of procedures; consistency of procedures; and control of all aspects of the manufacturing cycle. There are three levels of ISO certification. ISO 9001 is the highest and most comprehensive level for companies that design and manufacture their own products.
Warranty Information
|
|
|
|
|
|
|
|
|
|
|
You may need to download 